The owners of the XPM78 V.1, the first boat of our XPM series to meet the waters, visited our shipyard.
We also took advantage of being back in Antalya to stop by the Free Zone and Naval Yachts to see the progress on the several new builds they have underway. XPM78-02 mv Vanguard is now looking very much like a boat now that the superstructure for the Pilot House is in place.
The other build is for the larger XPM85-01 which is in the early stages of the ‘hotworks’ and after a long wait due to supply chain and other issues, all the aluminium plates and parts have been delivered. These boats are built upside down in this first stage until all the hull plating is welded in place and then the hull is flipped right way up.
The upside down deck plates are first put together in the steel framework bolted to the floor and then frames and bulkheads are tacked in place.
Meanwhile, over on Vanguard, Uğur and Nihat, who did most of the AL work on Möbius are now busy welding the hundreds of Al pieces in place. You can see some of the cut and rolled plates for the keels setting on the floor to the Left.
XPM78-02 is based on the same design as Möbius but will have twin JD engines as you can see from the dual prop tunnels in these two photos.
The aft deck will be slightly larger and the Owners have decided to build some of the furniture into the boat such as this L-shaped dining area. Large window behind it, WT door into the SuperSalon in the middle and stairs up to the SkyBridge on the Right.
Here is the view from inside the SuperSalon looking back out onto the Aft Deck.
Going up those stairs the SkyBridge is starting to take shape and more built in furniture with an other L-shaped settee at the Aft end.
Peering down from the very Aft end of the FlyBridge and roof overtop of the Aft Deck you can see the same arrangement as on Möbius with the doghouse for walking into the Engine Room on the Left and matching winding stairs on both sides.
Looking up and aft lets you see another view of the upside down XPM85.
Back down to Deck level on Vanguard, you can see another owner driven change with the addition of these bulwarks running most of the length of the side decks.
Bulwarks run all the way up to and around the Anchor Deck and bow.
Up at the Bow the “sidewinder” anchor setup is the same as we designed for Möbius along with the Samson Post in the center and nose cone in the very front. This setup has proven to work out eXtremely well on Möbius so has been replicated here on hull #2. You can see how Dennis has nicely designed the Bow and anchoring arrangements to now include the wrap around bulwarks.
Wayne Hodgins, Möbius World
